Your Cart

 2019-2022 Kawasaki Ninja ZX-6R “636” Track LS Seat

 2019-2022 Kawasaki Ninja ZX-6R “636” Track LS Seat


Ventilated soft upholstery seating leather provides the most luxurious look and ride.

Fitted rain cover specially designed to protect your seat from water and dirt

More comfortable than any stock seat on the market, but there’s no question it’s a custom, hand built seat designed to match the characteristics of your specific motorcycle.

Driver’s seat height mimics the original seat, but with a wider driver's rear section for comfort plus a specially shaped nose that helps the rider’s feet touch the ground better at stops.

In most cases, the pitch of the seat’s foam is revised to eliminate the rider from being forced into the fuel tank while riding.

Slightly bucketed in the rear section to contour to the rider’s body for better control during aggressive riding.

Easy to install, bolts to your bike just like the stock seat.

  • Designed and built in the U.S.A.
  • Saddlemen’s Ultra foam is formulated to provide a perfect balance of rigidity and user compliance with integrated GelCore™ Technology.
  • Installs easily with all necessary mounting hardware and instructions included.

Material/Finish: Perforated Leather inserts with Whisper Saddlehyde accents

2019 Kawasaki Ninja Series Ninja ZX-6R

2020 Kawasaki Ninja Series Ninja ZX-6R

2021 Kawasaki Ninja Series Ninja ZX-6R

2022 Kawasaki Ninja Series Ninja ZX-6R

The ideal cover for a motorcycle must exhibit many features, and Saddlemen utilizes the best material, Saddlehyde™, which provides the optimum combination of good looks, comfort and durability. First, Saddlehyde™, has a luxurious look and feel due to its leather grain and soft touch feel. Second, Saddlehyde™ has a built in compliance, or stretch, that enhances the gel and foam characteristics for increased comfort. Many other materials, including many leathers, are more board like and prevent the foam or gel from doing their job of softening your ride. Third, motorcycle seats are exposed to some of the worst conditions imaginable; bright sun, heat, rain and constant flexing, conditions that ruin the looks and durability of ordinary materials. Saddlehyde™ excels in these conditions and constant application of conditioners is not required.

Our unique Co-mold process is the largest comfort advancement in motorcycle seating since the creation of the suspension.

The Cushion Layer

The top sculpted layer is the sensory layer. It cushions and provides that nice soft touch.

The Absorption Layer

The middle layer isolates vibration, absorbs and dampens shock, disperses the pressure and promotes blood flow which alleviates hot spots created by foam only seating solutions.

The Support Layer

The bottom layer “the shell” is the stability layer. The polyurethane substructure completes the seating foundation to provide a truly unique riding experience.

Scientifically proven, this amazing product will increase the amount of time you spend on your motorcycle. A seat made with SaddleGel is scientifically engineered to dampen, divert and deflect the energy from road shock which air bladders and 70 year old foam only seat technology cannot protect you from.

Our SaddleGel has the ability to conform to all body shapes, sizes, and contours to reduce pressure points and promote blood flow which minimizes “hot spots “associated the pain and discomfort.

Otherwise, pressure points or “hot spots” can hinder blood flow, causing pain and discomfort. Normal circulation is never lost on a seat with SaddleGel and it keeps you comfortable on a long ride.

Whether it's a football helmet, hospital bed, knee pad or body armor, the foam it contains plays a critical role in making that product both comfortable and safe. But can that foam be transformed into something significantly better, safer and more comfortable?

Foam only seating dates back to the 1940’s. Still after 70 years many motorcycle seating manufactures solely rely on this low cost solution ignoring the advancements in technology.

Years of study, combined with practical experience, has led to the formulation of Saddlemen’s Progressive Density Foam. The chemical make-up and raw material volume is carefully tuned to create a foam pour that is balanced between support and compliance. Varied cell sizes and types are encapsulated in the foam by an element-resistant skin that seals the foam from water and enhances the seat’s durability as well as comfort.

To complete the process then tunes the density and shape which are also necessary to provide the superior foundation for Saddlemen’s unique co-molding process that optimizes reduction is vibrations and shock directly related to rider fatigue.

Unlike most foam that has open holes at the surface, Saddlemen’s Profoam actually has an abrasion resistant skin that resists water intrusion. This barrier is engineered to form during the molding process and protects the micro cellular foam core from breaking down, which is common with many OEM and aftermarket seats.

Seat Dimensions

12" 11.5"


 2019-2022 Kawasaki Ninja ZX-6R “636” Track LS Seat

Brand Fitment: Kawasaki
Model Fitment: ZX6R "636"
Year Fitment: 2019-2022

Product Overview (HD)


2019 Kawasaki Ninja Series Ninja ZX-6R

2020 Kawasaki Ninja Series Ninja ZX-6R

2021 Kawasaki Ninja Series Ninja ZX-6R

2022 Kawasaki Ninja Series Ninja ZX-6R

  • : BUILT to ORDER
  • Drag Specialties/Parts Unlimited Part #: 0810-2400
  • Saddlemen Part #: 0810-K075